Some of the most common processing details are set out
below.
Customised procedures and solutions are provided to meet client-specific
technical and aesthetical needs.
Original Format 1:1.33 (4:3)
Cine projection mask = 1:1.66
If the whole PAL picture is to be kept, two black bands reducing the
width of the 1:1.66 projection mask size will be visible during conversion,
not on the wide screen.
|
 |
Original Format 1:1.33 (4:3)
Cine projection mask = 1:1.66
In this case, in order not to use the two black bands, check the picture
borders exceeding the mask size
(top and bottom) can be cut off.
|
 |
Original Format 1:1.77 (16:9)
Cine projection mask = 1:1.85
In the 16:9 format, if the shot is projected at 1.85:1, two very thin
portions of it (top and bottom) will be cut off.
|
 |
Original Format 1:1.77 (16:9)
Cine projection mask = 1:1.85
If the whole picture is to be kept, two thin black side bands
reducing the width of the projection mask size
will be visible, but not on the wide screen.
|
 |
Original Format 1:1.77 (16:9)
Cine projection mask = 1:1.66
In this case, check the picture borders exceeding the mask size (right
and left)can be cut off.
|
 |
